VINTAGE: (2) Royal Racer snow sleds. Two different models, one 41" long & the other 42" long. Stored most of the year in grandpa's shed. Each year the mice did a number on them. They must have been really hungry. But with a new rope or a loop of twine, they were always ready for more fun.

STORAGE: (2) Wooden medicine chests. Both with adjustable shelf levels. Mirrored chest is 23.5" wide x 29.5" tall x 4.5" deep. Has (3) wooden shelves. Glass front chest is 25.75" wide x 29.25" tall x 5.5" deep. Pegs for (3) shelves, but only (2) glass shelves are included.

STORAGE: Hospital Bedside Cabinet. Heavy built with (1) drawer & storage below. Towel bars on two sides. Cabinet is 34.5" tall 16" deep & 20" wide w/o towel bars. The removable bars add 1.75" to each side of the cabinet. The drawer is 3" tall and bottom storage is about 19" tall with one fixed shelf.

STORAGE: Metal storage unit. Overall 37.75" wide x 32" tall X 20.25" deep. Actual storage area is 22" tall. Top sheet metal covering is backed with wood for extra strength.

STORAGE: Homemade wooden cabinet. 35" wide x 19" tall x 11" deep w/doors. (1) shelf.

STORAGE: Heavy metal old kitchen cabinet. 36" wide x 18" tall x 12" deep (13" w/doors). No shelves. Bad latches.

STORAGE: (3) Storage cabinets. Keep the mice out of your garage tools and supplies. All metal old kitchen style cabinet. 60" x 22" x 10" deep. (5) shelf levels inside. All metal old bread box cabinet. 15" x 11.5" x 11" deep. (1) removable shelf inside. Roller cabinet. All metal except for the wooden top. 32" x 18.5" x 13.5" deep. (1) shelf inside.

STORAGE: (3) Medicine Cabinets. (1) Mirrored medicine cabinets that can be recessed between 16" o.c. studs. Multi-level shelving (not included). The recessed box is 12" x 16" with a rim that is 13.5" x 17.5". The mirrored area is about 14.25" x 20.25". (1) Mirrored surface mounted med. chest. Main box is 15.5" x 17.5" x 4.5" deep. Has (2) fixed level shelves. The mirrored area is about 14.25" x 20". Also has a flip-down towel bar at the bottom. (1) glass shelf is included. (1) Non-mirrored surface mounted med. chest. Main box is 15.5" x 17.5" x 4.5" deep. Has (2) fixed level shelves (not included).

FINISH: White porcelain wall panels accents. Each have two mounting holes, one at each end. (3) Panels 6" wide x 29" long x 3/8" thick. (4) Panels 6" wide x 56" long x 3/8" thick.

STORAGE: Homemade wooden (12) drawer storage Unit No. 1. Overall size: 25" wide x 21" tall x 12.5" deep. Number on drawer indicates the number of compartments within the drawer. Drawers have I.D. card file holders.

STORAGE: Homemade wooden (12) drawer storage Unit No. 2. Overall size: 25.5" wide x 21" tall x 12.5" deep. Number on drawer indicates the number of compartments within the drawer. Drawers have I.D. card file holders.

STORAGE: Homemade wooden (10) drawer storage Unit No. 3. Overall size: 25" wide x 27.5" tall x 12" deep. (4) single sized drawers & (6) double sized drawers. Number on drawer indicates the number of compartments within the drawer. Drawers have I.D. card file holders.

STORAGE: Homemade wooden (12) drawer storage Unit No. 4. Overall size: 25" wide x 28" tall x 12 deep. (8) single sized drawers & (4) double sized drawers. Number on drawer indicates the number of compartments within the drawer. Drawers have I.D. card file holders.

STORAGE: (4) Heavy Duty Galvanized Metal Totes with Handles. Rough size is about 18" x 25" each. (3) 5"deep & (1) 7" deep. Corner bracing allows for nesting of the (4) totes. BONUS: Homemade storage rack for totes to slide in is 21.5" wide x 25.5" deep x 47.5" tall.Plus (3) Plastic coated wire racks. 18.5" x 18.5" x 1.5" deep that fit the storage unit. But they will need wood strip shelf supports to be added to the unit.

FINISH: Granite stone 1" thick slabs. Two edges rounded and two edges squared-off. (1) 14" wide x 57.5" long x 1" thick. (1) 14" wide x 63.5" long x 1" thick.

HARDWARE: Piano hinges. (2) at 53" long & 61.5" long.

STORAGE: Shelf pilaster, adjustable shelf standard for support clips. 5/8" wide standards without shoulders. (4) 5' long standards. (5) 4' long standards. (4) are brass plated. (4) 1' long standards. (45) 9/16" wide clips for shelves.

STORAGE: Shelf pilaster, adjustable shelf standard for support clips. 3/4" wide standards with shoulders. (10) 3' long standards. (3) 37" long standards. (3) 35" long standards. (84) 5/8" wide clips for shelves. 25 bronze plated & 59 not plated.

STORAGE: Shelf pilaster, adjustable shelf standard for support clips. 1" wide standards with shoulders. (4) 2' long standards. (1) 36.5" long standard. (35) 3/4" wide clips for shelves.

STORAGE: Elgin style adjustable metal shelf standards. (2) 4' long standards. New in package w/ screws. (4) 5' long standards. (2) 6' long standards. (7) 10" wide brackets for Elgin style standards.

HOBBIES: (27) Cork style wine bottles. Varied sizes & colors. Includes misc. corks: real corks, synthetic corks & plastic corks.

UNO-VAC vintage thermos and wide mouth thermos. Unbreakable stainless steel linings. Keeps things hot or cold.

HARDWARE: A variety of tool holders, hooks & hangers.

HARDWARE: Angle iron and flat stock with spaced perforations. Light weight angle iron. 3/4" x 3/4" at these lengths: 28", 24", 23", 19", 16", & 13". Medium weight angle iron. (1) 1.75" x 3" x 9" long. 1.5" x 1.5" at 16", 12", 11", 11", 5" long. 1.25" x 1.25" at 38"+ & 12" long. Flat stock iron. 1" wide: (5) 18" long; (2) 8" long; (1) 6" long; (3) 3" long. Flat stock iron 5/8" wide: (5) 15" long; (1) 11" long.

HARDWARE: Mid-sized angle shelf brackets. (2) 9" x 7"; (2) 9.5" x 7.25"; (2) 10" x 8"; (5) 12" x 10"; (4) 11" x 3"

HARDWARE: Heavy duty tool hangers. (3) Extra heavy hanger bars with upturned ends. (6) Heavy duty hanger bars with upturned ends. (2) closely spaced can be used for long handled tools (shovels, rakes, etc.). (4) Horse shoe hangers. (2) with closed loop. (2) with (lucky) upturned shoe for hanging anything you want. (1) Heavy duty towel style bar. 16" Wide to fit on studs 4" deep to hold or confine a variety of tools.

HARDWARE: Small angle shelf brackets. (2) 5.5" x 4.5"; (9) 6" x 5"; (4) 7.25" x 5.25"; (7) 8" x 6"

HARDWARE: Pipe strap. Iron strap: 43" & shorter. Copper 3/4" wide: 42", 39" & 16" long. Brass 5/8" wide: (2) 6" long.

DOMESTIC: Queen sized comforter with (2) pillow shams. Comforter measures about 87" square.

DOMESTIC: (2) Suit cases, camera bags, ski boot bag. Numerous stuff sacks and storage bags of many different sizes. A little bit of everything.

HARDWARE: Large sized angle shelf brackets. Most are homemade. Homemade: (2) 26' x12"; (2) 18" x 13"; (2) 16" x 9.5" w/ pole loops; (2) 12" x 8"; (2) 11"x 11". Vintage Cast Iron: (1) 15" x 14.5"; (1) 14.5" x 13".

HARDWARE: Small and light duty plant hangers and angle shelf brackets. Plant hangers: (1) 12" x 4"; (1) 8.5" x 4.5"; (1) 8" x 6" cast iron; (1) 6" x 5.5" cast iron. Angle brackets: (1) 10" x 8"; (1) 8"x 6"; (2) 5" x 4"; (2) 4" x 3.5" chrome plated.

ELECTRICAL: Large assortment of electric box cable clamps & metal conduit shielded cable connectors.

HARDWARE: Turnbuckles. Assortment of sizes. Many with hooked or looped ends. Some parts (without bolts). (1) New, in the package, 42" long made for reinforcing for a screen door.

LAWN & GARDEN: Suncast (1) gallon garden sprayer. Original sprayer head available, but replaced with brass head.

(1) 5/8" Mandrel. 13" long, threaded 2" on each end. Includes washers & spacers for whatever application you may want. (1) 5/8" Mandrel turned down from 1" diameter shaft. Overall, the mandrel is 16" long.

HARDWARE: (3) Homemade long handled tool holders for shovels, rakes, etc. Holding end is about 21" long for multiple tools.

AUTOMOTIVE: Weld On Trailer Axles. (5) bolts on 5.5" diameter. Wheels without tires are included.

Squirrel Cage Fans. (2) with drive pulleys.

Peerless Electric Motor. 1/6 HP, 1725 RPM. Includes mounting bracket and drive belt.

UTILITY: Chisholm Moore Cyclone Chain Fall Hoist. 1/2 Ton Model M. Chain has about 8' of travel. Works smoothly and effortlessly.

HARDWARE: Table and furniture legs. All legs are tapered. Some have metal end caps. Others may have metal/plastic end caps. Some are surface finished, but most are not. Some have mounting screws rather than bolts, so no plates are needed. Some mounting plates (4) Two position, new in the box; (4) used. Approximate lengths (w/o mounting bolt or screw): (4) @ 16"; (8) @ 8"; (9) @ 5.5"; (10) @ 5"; (2) @ 4.25". BONUS ITEMS: (2) Vintage, wooden, compact towel bars. (5) Flag pole finials.

ELECTRICAL: Porcelain lamp holders. A large variety of sizes and styles. (19) with bases of 4.75", 4.5", 4.25", 3.75" diameters. (5) additional porcelain holders only. Bag full of porcelain parts for varied configurations.

STORAGE: (2) Heavy tin, open bin storage racks. Each is 38.5" x 10.5" x 3" deep with multiple dividers.

AUTOMOTIVE: Truck tire chains. 12" wide x abt. 79" long (with 13" of extension & an extra cross bar).

AUTOMOTIVE: Truck tire chains. 12" wide x abt. 78" long (with 6" of extension).

BUILDING MATERIALS: Coil of 6" wide aluminum flashing.

HARDWARE: I.D. card file holders. (10) - 5.25"x 3.25" (w/ ear tabs); (19) - 5.25"x 3.25" (w/o ear tabs); (57) 3.25"x 1.5"; (10) - 2.75"x 0.5"; (1) - 5"x 1.25" (brass); (28) 2.25"x 0.75" (brass); (27) - 2.75"x 0.5" (brass).

VINTAGE: You won't see this in many auctions. (5) prong spear fishing spear. Overall with pole is 82" long.

WALL DECOR: "MEN WORKING" sign. 24" x 24" on heavy aluminum plate.

FASTENERS: Old fashioned 5" long cut nails. Approximately 17 pounds of nails.

RECREATION: (61) Golf balls. Some good, some bad. Some with ugly smiles and some range balls.

ELECTRICAL: Large variety of electrical insulators. Several service entrance insulators w/ mounting screws. Includes mid-sized insulators and small insulators for agriculture electric fencing. Also includes old knob & tube insulators.

HARDWARE: Cabinet and drawer pulls & knobs. Large variety of shapes & sizes.

HARDWARE: Hose clamps. Large variety of styles and sizes. Many worm gear style. Other style include tower clamps, spring clamps, wire clamps and spiral clamps.

ELECTRICAL: Light Fixtures. (1) Decorative brass. (1) 60 Watt capacity. New in the box, ceiling light fixture. (1) Used ceiling light fixture. (1) 60 Watt capacity. (1) Vanity wall light fixture. (4) lamps set in an oak accent panel.

ELECTRICAL: Rigid & flexible PVC conduit and misc. fittings. Most are Schedule 40 and have the female coupler end. Rigid: 1.25" dia. X 5' long; 3/4" dia. X 8' long; 1/2" dia. X 10' long; 1/2" dia. X 7' long; 1/2" dia. X 80" long; 1/2" dia. X 59" long. Misc. rigid pieces with bends, fittings & boxes. Flexible: 1/2" dia. X 48" long. (2) 1/2" dia. 90 degree fittings. 1/2" pull-thru box.

HVAC: Miscellaneous chimney, venting & ducting pieces. (1) Double walled 6" diameter x 5' long chimney pipe. (2) Simpson Dura Vent (0062 5GVL90). Double walled, 5" adjustable 90 degree, Type B gas vent pipes.(4) Inline duct fans. (1) 8" duct; (2) 6" ducts; (1) 4" duct. (1) Metalbestos (363H). Aluminum, 6" top cap. (1) Americap (733G). Aluminum, 5" Type B gas vent cap. (4) Galvanized, single wall reducers. Pipe diameters: 8" to 6" (w/o crimps); 7" to 6"; 7" to 5"; 6" to 5". (1) Screened vent with hood. 7.5" x 7.5" mounting plate for 6" diameter vent opening. 3/8" hardware cloth mesh over opening. (1) Open vent. 8" x 8" mounting plate. (1) 6.5" diameter rain collar. (1) 6" diameter pipe cap. (2) cast iron chimney dampers. Diameters: (1) at 8" & (1) at 6". (1) 6.5" diameter rain collar. (1) 6" diameter pipe cap. (2) cast iron chimney dampers. Diameters: (1) at 8" & (1) at 6". Misc. flexible ducting (2) 4" diameter plastic & (1) 6" diameter aluminum.

MISC: Lawn Mower Parts. New, in the blister pack, B&S muffler, part No. 396006. Fits 1/2" pipe threads. Gas tanks: (1) All plastic . (1) Large plastic tank with metal mounting bracket. Mower blades: (1) 16" Thatcher blade. (1) 19.75" Straight blade with adapter to accept 3/8" drive. Re-wind chord with housing: (1) B&S 3.5b HP. (1) B&S 5.0 HP Long Rewind chord.

HARDWARE: Paint Brushes. Many styles and many sizes from small artist brushes up to 4" wide brushes.

HARDWARE: Rope pulleys. (1) 5" dia., permanent mount. (1) 3.5" dia. w/ swivel hook on top & loop on bottom. Pulleys with loop on top: (1) @ 2.5"; (1) @ 2.25"; (11) @ 2"; (1) @ 2" double pulley; (1) @ 1.5"; (7) @ 1". Permanent mount pulleys (2) @ 1.75". Several others as small as 3/8" diameter wheel. Permanent mount window sash pulleys: (7) @ 2"; 2 @ 1.5"; (7) @ 0.5".

ELECTRICAL: Switch & outlet plates covers including outdoor covers. Plastic, bronze, HD galvanized and a few others. Brown Plastic: Blank plates; Single switch; Double switch; Duplex outlet; Switch & duplex outlet; (4) Triple switches. White Plastic: Single switch; Double switch; Duplex outlet; Dbl. duplex outlet; GFI outlet; Switch & GFI outlet; Switch & duplex out. Bronze: (6) Single switch; (1) duplex outlet. HD Galvanized: (8) Blank plates; (2) Single switch; (2) Double switch; (3) duplex outlet; (1) Dbl. duplex; and other misc. Outdoor Boxes: (1) NEW, horizontal, duplex flip cover; (2) NEW, vertical duplex cover; (1) Used, vertical duplex cover; (3) Used, single vertical 1.5" round outlet; GFI horizontal cover.

HARDWARE: Pail of light weight wire metal cables. 1/4" diameter and smaller.

HARDWARE: Pail of pulleys. Most are light weight. (3) 11" dia.; (1) 9.5" dia.; (1) 9" dia.; (2) 7.75" dia.; (1) 7.25" dia. cast iron; (2) 7" dia.; (1) 6.75" dia. plastic; (1) 6.5" dia.; (6) 6" dia.; (1) 5.5" dia.; (1) 4.75" dia.; (1) 4.5" dia.

HARDWARE: Pail of heavy duty pulleys. Available diameters: (3) @ 1.5"; (2) @ 1.75"; (5) @ 2"; (2) @ 2.25"; (5) @2.5"; (1) @ 2.75"; (8) @ 3"; (2) @ 3.25"; (1) @ 3.5"; (3) @ 4"; (1) @ 4.5". Double pulleys: (1) @ 2"; (1) @ 3"; (1) @ 3.5". (4) miscellaneous idler pulleys.

HARDWARE: (5) Gallon bucket full of springs. Includes all kinds, big, small, long & short. Approximately 37 # with bucket.

VINTAGE: Old bushel baskets, boxes and crates. (6) Wooden Bushel Baskets; (1) 50# wood crate for Joe Ori Louisiana Sweet Potatoes, 17" x 13.5" x 13.5" deep; (1) Soda pop carry case. Dossins Beverages (Detroit, Grand Rapids, Toledo) Par T Pak of (1) dozen quarts. 16.5" x 12" x 12.5" tall. (1) Soda pop carry case. Unknown maker but with logo "The Drink in the Big Bottle". 18.5" x 12" x 10.25" tall. (1) C&H Sugar box. Hard to read. 15.5" x 9.5" x 10" tall.

BUILDING MATERIALS: Smooth White Aluminum Coil Stock. (1) Pce. 24" wide x about 7' long. (1) Pce. 11" wide x about 7' long. (1) Pce. 7.5" wide x about 7' long; (1) Pce. 7" wide x about 7.5' long.

STORAGE: Large wooden storage box. 47.5" x 22.5" x 20" tall.

APPLIANCE: Mini-Refrigerator. 22" x 19" x 33.5"tall. It ain't pretty but it keeps your beer cold and if you turn it to 10, it will freeze.

ELECTRICAL: Misc. heavy duty conduit boxes. Some with on-off controls (2) Crouse-Hinds Co., Mfg. No. FS1. HD boxes with on-off push button controls. (1) Crouse-Hind Co., Mfg. No. EFSC 2129. Hazardous location on-off lever switch. (3) Heavy duty conduit boxes. (1) Extra large junction box. 9" x 4.5" x 1.75" deep. (4) Entrance mast heads in a variety of sizes. Pulling elbows: (3) 3/4" diameter; (2) 1" diameter. Neer cable connecters. New in the bag. No. 44675 (1.5") & No. 44676 (2"). Many more misc. cable connectors.

ELECTRICAL: Old fashioned household fuses. A variety of amperage ratings. (36) Type "T" screw in fuses. (16) Type "S" screw in fuses. "Fustats". (14) Cartridge plug in style fuses.

ELECTRICAL: Square electrical junction boxes. (4) 5" Square x 2" deep heavy duty junction boxes. (8) 4" Square x 2" deep standard duty junction boxes. (9) 4" Square x 1.5" deep standard duty junction boxes. (2) 4" Square x 1.5" deep standard duty junction boxes with mounting brackets. (5) 4" Square cover plates. (1) 4" Square single outlet cover plate. (2) 4" Square double outlet cover plates. (2) 4" Square circular outlets. 1.75" diameter & 1.5" diameter. (2) 5" Square circular outlets with 1.5" diameters.

ELECTRICAL: Electrical ceiling boxes. (16) 3.25" Octagonal boxes. (14) 4" Octagonal boxes. (8) 3.5" Diameter compact boxes. (6) 4" Diameter solid plate.(1) 4" Diameter duplex receptacle plate.(2) Reducer plates. 4" round to 3.25" round. (3) 3.5" Diameter plates with center holes.

ELECTRICAL: (7) 30 Amp Safety Switches Cutler-Hammer, Mfg. No. 4141H241. Safety switch Type D; 2-wire (1-line & 1-load), 30A 125V. Cutler-Hammer, Mfg. No. 4141H341. Safety switch Type D; 3-wire (2-lines & 2-loads) Square D, Mfg. No. 99211. Safety switch, 30 Amps, (2-lines & 2-loads). Square D, Mfg. No. 97211. Safety switch, 30 Amps, (1-line & 1-load). Square D, Mfg. No. 97311. Safety switch, 30 Amps, (2-lines & 2-loads). Wadsworth, Mfg. No. N25. Safety switch, 30 Amps, (2-lines & 2-loads). Wadsworth, Mfg. No. 3833. Safety switch, 30 Amps, (2-lines & 2-loads).

ELECTRICAL: (6) Misc. Service Boxes. Bryant Electric, Mfg. No. 60102. 60A, 600V Manual motor starter (w/o overload protection). Parts-2-O, Mfg. No. 5342200. Submersible motor control. 1/2 HP, 230V. General Switch Corp., Mfg. No. R610MU. Rain proof enclosure. 60A, 240V, 10HP max. Generic main disconnect box. 9.5" x 5.5" x 4.5" deep. Square D, Mfg. No. Hom2-4L70. Load Center. Parts missing inside. Service box. 7.5" x 4.5" x 3.5" deep. All parts missing inside except for ground lug.

ELECTRICAL: Large appliance electrical pig tails, outlets & boxes. Pig Tails: (2) NEMA 10-30; (4) NEMA 10-50. Outlets with enclosure boxes: (1) NEMA 14-30R; (1) NEMA 10-50R. Outlets: (1) NEMA 14-30R (New in the box); (1) NEMA 10-50R (With cover plate); (2) NEMA 10-20R. Misc. Outlets: (2) 30 Amp Hubble Twist Lock; (5) 15 Amp 125V or 10 Amp 250V outlets with vertical & horizontal prongs.

ELECTRICAL: 60 Amp Service Boxes & Large Service Entrance Box. Cutler-Hammer, 60 Amp, 120V service box. Federal Noark service box. Missing components inside. Appears to be 60 Amp , 120V. Large Service Entrance Box. 12" x 12" x 6" deep.

ELECTRICAL: Electrical metal boxes and accessories. Handy or utility boxes: (6) 4" x 2" x 1.75" deep; (1) 4" x 2.25" x 1.75" deep; (5) 4" x 2" x 2" deep; (1) 4" x 2.5" x 2" deep. Switch or single gang boxes: (4) 3" x 1.75" x 2.25" deep; (1) 3" x 1.75" x 2" deep. Switch or double gang boxes: (5) 3" x 3.75" x 2.25" deep; (1) 3" x 3.75" x2.5" deep. Switch or triple gang boxes: (2) 3" x 3.75" 2.25" deep. Box extenders: (2) 4" x 2" x 1.75" deep. Pancake boxes: (2) 4.5" x 3" x 1" deep. Also includes cable clamps, box ears, mounting brackets and other box accessories.

UTILITY: Wheel & tires for small equipment. (2) Tire & wheel. Overall 20" diameter. Tire size 4.00 x 12. Wheel accepts 1" dia. axle. (2) Tire & wheel. Overall 16" diameter. Tire size 16 x 6.50 x 8. Wheel accepts 3/4" dia. axle. (1) Tire & wheel. Overall 15.5" diameter. Tire size 4.80 x8. Wheel is (5) lug, 4.5" diameter bolt pattern. (1) Tire only. Goodyear 4.00 X 8. (1) Tire only. 4.10/ 3.50 x 6. (1) Wheel only. (4) lug, 4" diameter bolt pattern. Wheel overall is 9" diameter x 4.5" wide.

ELECTRICAL: 30 Amp Safety Switches, Branch Circuit Cutout Boxes & Other Misc. Boxes. Square D - 97311-WH, 30 Amps (2) Circuits. Arrow Hart - 27003, 30 Amp, (2) Circuits. Wadsworth - N29, 30 Amps, (2) Circuits.Murray - DFI22NS, 30 Amps, (2) Circuits. Generic (No identifier), 30 Amps, (2) Circuits. Wadsworth - 2B, Branch circuit cutout, 30 Amps, (2) Circuits. Murray, Branch circuit cutout, (4) Circuits. Jacuzzi - 9194-2441, Submersible pump control box. Large Junction Box, 6" x 6" x 4" deep. Service Entrance Box, 7.5" x 9" x 3.5" deep.

PLUMBING: Pipe nipples & fittings. Nipples 1", 3/4", & 1/2" diameters at various lengths. Fittings including couplings, angles, reducers, tees, unions, floor flanges, caps & plugs.

POWER TOOL: 'Master Quality Power' wood lathe. Model 10040, (4) Speed with reprinted manual.

AUTOMOTIVE: Misc. automotive exhaust parts. Headers specified for a 283 Chevy engine installed in a CJ-5 Jeep. Right side new & never used, with new gaskets. Left side used. Exit at collector needs work. Muffler (vintage???) with 43" long body and 2" long inlet and outlet. 2" diameter inlet & outlet. Straight pipe 60" long. Inlet 2" is inside diameter, with rest of pipe 2" outside diameter. (2) 1.75 diameter pipes with bends. Unknown original use. New pipe but looks like pieces cut from ends.

VINTAGE: Model train controls and other transformers. Louis Marx & Co. (New York). "Toy Transformer" Catalog No. 1239. 110-120V converted to variable 7-13V. Lionel Corp. (New York). "Type W Transformer". 115Volts, 75 Watts with variable outputs. 5 to 10V; 11-16V & 17-22V. Lionel Corp. (New York). "Whistle Controller No. 66". Multi-control for model trains. Old transformers for home equipment. Nutone, Inc. 24V Chime transformer. Old two tone door bell. Jefferson Electric. "12V TV. A.". I believe this is for a TV antenna.

HARDWARE: (7) Misc. small electric motors. Includes Kenmore sewing machine motor with light & foot control.

HARDWARE: Wire rope clamps. Large & small. (1) 3/4"; (16) 5/8" (plus partial clamps); (1) 1/2"; (2) 3/8"; (2) 5/16"; (19) 1/4" or smaller w/ smallest at 3/16". (10) small thimbles.

HARDWARE: Casters. Hard rubber and some hard plastic casters of various sizes. Most wheels are 1" to 3" in diameter. A couple as large as 5" diameter. Most are swivel stem style casters. A few are plate style casters.

HARDWARE: Casters. Hard plastic casters of various sizes. Most wheels are 1.25" to 2.5" in diameter. Most are swivel stem style casters. A few are plate style casters. A bag full of ball style casters. Some 2.5" wide casters. (Typically seen on bed frames.) Light duty casters. Many are sets of new casters still in the bag.

HARDWARE: Vintage glass, wood and metal wheeled casters. (6) Glass wheeled casters. 1.5" diameter. Swivel stem style casters. (15) Wood wheeled casters. 1" diameter. Swivel stem style casters. (1) Wood wheeled caster. 1.5" diameter. Swivel stem style caster. Metal wheeled casters. 1.25" to 2" diameters. Swivel stem style casters. All packed in a vintage popcorn tin celebrating the 20th century (1901-2000).

HARDWARE: Security latch lock deadbolts and chain lock deadbolts. (6) different latch deadbolts. Additional strike plates included. (3) chain lock deadbolts with keys. Two are keyed alike.

VINTAGE: Door hardware. Mortised door locks, door latches, handle sets, cover plates (including skeleton key plates) & misc.

HARDWARE: Hard rubber tires, most mounted on metal wheels. 8" and larger. Wheels w/ size on tires: (2) 10.25" x 3.25"; (8) 10" x 1.75"; (2) 10" x 1.50"; (1) 8" x 2.50"; (2) 10 x 1-3/8". Measured diameters: (2) 14" diameter; (2) 10" diameter wheel chair; (2) 9.5" diameter; (1) 9" diameter; (2) 8" diameter. Short metal axles: (2) 3/4" dia. X 14"; (1) 3/4" dia. X 16.5"; (1) 3/8" dia. X 21".

HARDWARE: Hard rubber tires, most mounted on plastic wheels. Smaller than 8". Measured diameter 7.5": (2) used. Plastic wheel. Size on tire 6" x 1.5": (1) used. Metal wheel. Size on tire 6" x 1": (2) used. Plastic wheel. Measured diameter 6": (2) used. Plastic wheel. Measured diameter 5.5": (2) used. Metal wheel. Measured diameter 4.5": (2) used. Plastic wheel. Rubber idler wheels. (8) wheels, 3" diameter, plastic wheel hub with metal sleeve. (Found in cloths driers.) Short metal axles: (1) 1/2" dia. X 15"; (1) 1/2" dia. X 15.5".

BUILDING MATERIALS: Galvanized sheet metal. Heavy enough for furnace duct work. (6) Pcs. 12" x 19"; (4) Pcs. 18"x 19"; (2) Pcs. 8" x 39"; (1) each at 8"x 19", 17" x 20", 12" x 27", 30' x 35". (4) Pcs. that are folded 23" & 8" x 48". (1) Pcs. overall 36" x 36" with cut-outs. (36" x 25.5" clear.)

BUILDING MATERIALS: Metal plates of varied sizes and thicknesses. All dimensions are approximated. (1) 22" x 11" x 1/64" (non-magnetic stainless); (1) 30" x 24" (magnetic stainless); (2) pcs. 12" x 24"x 1/32"; (2) pcs. 14" x 22" x 1/32"; 18" x 12" x 1/32"; 24" x 27" x 1/16" (cutouts & holes); 22" x 11" x 1/16"; 20" x 13" x 3/32"; 12" x 6" x 3/32"; 17" x 9" x 3/16" (holes).

HARDWARE: Hardware cloth and other mesh pieces. (1) Extra heavy 1/2" hardware cloth. 30" x 14". (6) Pieces of 1/2" hardware cloth: 26" x 24"; 26" x 16"; 26" x 14"; 25" x 19"; 24" x 24"; 24" x 14". (1) Piece of 3/8" hardware cloth: 37" x 18". (3) Pieces of 1/4" hardware cloth: 31" x 24"; 30" x 18"; 24" x 22". (2) Pieces of diamond mesh: 32" x 10"; 23" x 9". (1) Piece of 1" x 2" mesh fencing: 30" x 22".

STORAGE: Heavy duty angle iron shelving. (7) shelf levels. 33" wide x 17" deep x 87" tall. (Unit #1).

STORAGE: Heavy duty angle iron shelving. (7) shelf levels. 32" wide x 17" deep x 87" tall. (Unit # 2).

UTILITY: 12' Wooden ladder.

VINTAGE: Bamboo cane fishing poles. Some are one piece. Others have ferrules and are two pieces.

Poor man's drywall lift for raising sheets of drywall up to 8' ceilings. Overall size is 3' x 6' x 73.5" tall. Can be broken down into (5)main pieces: (2) sliders, (2) ends & (1) back. Front is open for ease of use. When lift is not in use, it can be used as a shelving unit with the addition of planks or stiff plywood for shelves.

STORAGE: HD pipe & angle iron storage rack with planking shelves. (Unit "A"). Approx. 35" x 91" x 85" tall. Has 2" planking shelves on (4) levels. The 5th level is available for planking. This unit is set up to match shelf levels with Unit "B" to elongate storage to approximately 15' if butted together.

STORAGE: HD pipe & angle iron storage rack with planking shelves. (Unit "B"). Approx. 36" x 88" x 85" tall. Has 2" planking shelves on (4) levels. The 5th level is available for planking. This unit is set up to match shelf levels with Unit "A" to elongate storage to approximately 15' if butted together.

BUILDING MATERIALS: Concrete masonry units. (9) standard 16" blocks & (3) 8" blocks.

BUILDING MATERIALS: Brown Genoa gutters & downspouts. Gutters: (1) 10'; (1) 77"; (1) 41" & misc. smaller pieces. Downspouts: (1) 10'; (2) 24"; (2) 19".

EQUIPMENT: Cub Cadet LTX1042 (10HP & 42" mower deck). 2010 year of manufacture. Ran well until it started leaking oil like a sieve. Parts???

STORAGE: HD angle iron storage rack 75" long x 35" wide x 80" tall. (3) storage levels.

STORAGE: Homemade heavy duty, (3)-level storage rack. 34.5" long x 13" wide x 37" tall.

MISC: Heavy Tin Hood or Bins. Could be used either way. 57.5" x 28" x 9" deep with partition in the middle. No holes.

MISC: Tool stand. 25" x 15.5" x 33.5" tall.